APC Battery Management System User Manual download pdf (Page 112)

USER’S GUIDE

Battery Management System

105

When Boot mode is set to DHCP & BOOTP, two options are available:

• After IP Assignment in the control console (or Remain in DHCP &

BOOTP mode after accepting TCP/IP settings in the Web interface):

By default, this option switches Boot mode to the selection based on

the server that provided the TCP/IP settings (DHCP Only or BOOTP

Only).

• DHCP Cookie Is in the control console (or Require vendor specific

cookie to accept DHCP Address in the Web interface): By default,

this option requires that the DHCP responses include the APC cookie

in order to be valid.

When Boot mode is set to DHCP Only, two options are available:

• DHCP Cookie Is in the control console (or Require vendor specific

cookie to accept DHCP Address in the Web interface): By default,

this option requires that the DHCP responses include the APC cookie

in order to be valid.

• Retry Then Stop in the control console (Maximum # of Retries in the

Web interface), This option sets the number of times the Management

Card will repeat the DHCP request if it does not receive a valid

response. The default setting (0 in the Web interface, None in the

control console), requires that the Management Card continuously

send out DHCP requests until a valid DHCP response is received.

For more information about the APC cookie, see DHCP

response options.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 193 194

No comments

APC Battery Management System User Manual Page 112