APC Battery Management System User Manual download pdf (Page 41)

USER’S GUIDE

Battery Management System

Boot mode setting. This setting selects which method will be used to

define the Battery Management System’s TCP/IP settings whenever the

Battery Management System turns on, resets, or restarts:

• Manual: Three settings (System IP, Subnet Mask, and Default

Gateway) which are available only when Manual is used to define the

needed TCP/IP settings.

• BOOTP only: A BOOTP server provides the TCP/IP settings.

• DHCP only: A DHCP server provides the TCP/IP settings.

• DHCP & BOOTP: The Battery Management System will attempt to get

its TCP/IP settings from a BOOTP server first, and then, if it cannot

discover a BOOTP server, from a DHCP server.

An After IP Assignment setting, by default, will switch Boot

mode from its default DHCP & BOOTP setting to BOOTP only or

DHCP only, depending on the type of server that supplied the

TCP/IP settings to the Battery Management System.

For information about the After IP Assignment setting and other

settings that affect how the Battery Management System uses

BOOTP and DHCP, see Advanced settings; for more information

on how to use DHCP, see Boot Mode.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 193 194

No comments

APC Battery Management System User Manual Page 41