APC Battery Management System User Manual download pdf (Page 173)

USER’S GUIDE

Battery Management System

166

Use FTP or SCP to upgrade multiple Battery

Management System Management Cards

To upgrade multiple Battery Management System Management Cards

using an FTP client or using SCP, write a script which automatically

performs the procedure. For FTP, use the steps in Use FTP or SCP to

upgrade one Battery Management System Management Card.

Use XMODEM to upgrade one Battery Management

System Management Card

To use XMODEM to upgrade the firmware for a single Battery Management

System Management Card that is not on the network:

1. Select a serial port at the local computer and disable any service which

uses that port.

2. Connect the serial cable that came with the Battery Management

System to the selected port and to the serial port at the Management

Card.

Modbus and the control console share a common serial port.

You can use either one or the other to access the Battery

Management System.

See also

If you are using Modbus to access the Battery Management

System, you must configure the DIP Switches. For DIP switch

configuration, see “Configure the DIP Switches” in the

Installation and Quick Start Manual (.\doc\en\insguide.pdf),

provided in Portable Document Format (PDF) on the APC

Battery Management System Utility CD and in printed form.

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 193 194

No comments

APC Battery Management System User Manual Page 173