APC SU1400XLT User Manual download pdf (Page 47)

LINEFREQ : 50.0 Hz

OUTPUTV : 223.6 Volts

LOADPCT : 6.2 Percent Load Capacity

BATTV : 27.9 Volts

BCHARGE : 100.0 Percent

MBATTCHG : 5 Percent

TIMELEFT : 167.0 Minutes

MINTIMEL : 3 Minutes

SENSE : High

DWAKE : 060 Seconds

DSHUTD : 020 Seconds

LOTRANS : 196.0 Volts

HITRANS : 253.0 Volts

RETPCT : 050.0 Percent

STATFLAG : 0x08 Status Flag

STATUS : ONLINE

ITEMP : 35.1 C Internal

ALARMDEL : Low Battery

LASTXFER : U command or Self Test

SELFTEST : NO

STESTI : 336

DLOWBATT : 02 Minutes

DIPSW : 0x00 Dip Switch

REG1 : 0x00 Register 1

REG2 : 0x00 Register 2

REG3 : 0x00 Register 3

MANDATE : 01/11/99

SERIALNO : GS9903001147

BATTDATE : 01/11/99

NOMOUTV : 230.0

NOMBATTV : 24.0

HUMIDITY : N/A

AMBTEMP : N/A

EXTBATTS : 0

BADBATTS : N/A

FIRMWARE : 60.11.I

APCMODEL : IWI

END APC : Thu Dec 02 17:27:25 CET 1999

You should get pretty much the same output mixed in with html if you execute upsfstats.cgi directly from a

Unix shell in the cgi subdirectory as explained above for upsstats.cgi and multimon.cgi.

A Tip from Carl Erhorn for Sun Systems:

It is possible to run the CGI code to monitor your UPS using the answerbook HTTP server that runs on

Solaris. As long as your server has the Answerbook2 web server installed and running, you can insert the

cgi scripts into the cgi directory of the web server, and access the cgi using something like:

http://hostname:8888/cgi/multimon.cgi

CGI Credits

Many thanks go to Russell Kroll [email protected] who wrote the CGI programs to work with his UPS

Monitoring system named Network UPS Tools (NUT). Thanks also to Jonathan Benson

[email protected] for initially adapting the upsstatus.cgi program to work with apcupsd.

We have enhanced the bar graph program and hope that our changes can be useful to the original author

in his project.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 114 115

Comments to this Manuals

No comments

APC SU1400XLT User Manual Page 47

Comments to this Manuals