APC AP5202 Specifications download pdf (Page 5)

KVM Switch — Installation and Quick Start 1

Product Description and Inventory

Overview

The KVM Switch can connect up to 32 switches to provide direct control of 16 computers or control

of up to 512 computers through serial connections, using only one keyboard, monitor, and mouse.

Inventory

Hardware requirements

Console. To use the KVM Switch you will need the following equipment:

• VGA, SVGA, or Multisync monitor capable of the highest resolution that you plan to use on

any computer in the installation

• PS/2-style mouse

• PS/2-style keyboard

Computer. To use and access the KVM Switch, your computer requires the following:

• VGA, SVGA or Multisync card

• 6-pin mini-DIN (PS/2 style) mouse port

†

• Keyboard port

‡

– 6-pin mini-DIN (PS/2 style) keyboard port with +5VDC on pin 4 and ground on pin 3, or

– 5-pin DIN (AT style) keyboard port with +5VDC on pin 5 and ground on pin 4

†

The KVM Switch does not support serial mice. You cannot use serial-to-PS/2 adapters with the cables.

‡

If your computer uses an AT-style keyboard socket, purchase a PS/2-to-AT keyboard adapter to plug the cable

into the keyboard port on the computer.

Quantity Item

1 KVM Switch

AP5201 (8 port)

AP5202 (16 port)

1 Configuration cable

1 L5-15 to IEC power cable

2 Brackets for a 19-inch enclosure

1 Installation Manual

1 KVM Switch Utility CD

1 Warranty card

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

APC AP5202 Specifications Page 5