APC AP9606 Quick Start Manual download pdf (Page 15)

Quick Configuration

continued

Local (serial)

access,

continued

4. Run a terminal program, such as HyperTerminal.

5. Configure the serial port for 2400 bps, 8 data bits, no par-

ity, 1 stop bit, and no flow control, and save the changes.

6. Press

NTER

to display the

User Name

prompt (you may

need to press

NTER

two or three times).

7. Use

apc

for the

User Name

and for the

Password

8. See “Control Console” below to finish the configuration.

Address

Resolution

Protocol (ARP)

and Telnet

access

You can use ARP and Telnet to access the Control Console from

a computer on the same subnet as the Management Card.

1. Use ARP to assign an IP address to a Management Card

that has a specified MAC address. For example, to assign

IP address 159.215.15.141 to a Management Card that

has a MAC address of 00 c0 b7 63 9f 67, the ARP com-

mand would be:

arp -s 159.215.15.141 00-c0-b7-63-9f-67

Note:

The Web/SNMP Management Card Quality

Assurance slip lists the MAC address.

2. Use Telnet to access the Management Card at its now

defined IP address. For the IP address assigned by ARP in

the previous step, the Telnet command would be:

telnet 159.215.15.141

3. Use

apc

for the

User Name

and for the

Password

4. See “Control Console” below to finish the configuration.

Control Console

Once you log into the Control Console, as described in either

“Local (serial) access” on page 10 or “Address Resolution

Protocol (ARP) and Telnet access” above, do the following:

1. Choose

Network

from the

Control Console

menu.

2. Choose

TCP/IP

from the

Network

menu.

3. Disable

BOOTP

, if enabled, and select

Accept Changes

4. Set the

System IP

Subnet Mask

and

Default Gateway

address values and select

Accept Changes

5. Press

TRL

-C

to exit to the

Control Console

menu.

6. Click

Log out

to have the changes take effect.

Continued on next page

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

APC AP9606 Quick Start Manual Page 15

Comments to this Manuals

Related products and manuals for Networking APC AP9606