MasterSwitch VM User’s Guide 16
Menu Items
MasterSwitch
VM
Unit Configuration
Continued on next page
Item Definition
Name
Name of the MasterSwitch
VM
unit (
23
characters
maximum).
Cold Start Delay
ThetimethatMasterSwitch
VM
will delay in applying power
to outlets, once the
AC
power is applied to the MasterSwitch
VM
unit.
Overload Warning
Threshold
The percentage of a full load that will trigger an overload
warning. An overload warning will cause the overcurrent
alarm
LED
to flash green and sound the audible alarm (if the
overload audible alarm property is configured to do so).
Overload Outlet
Restrictions
The overload conditions, if any, that will prevent outlets from
turning on. The following actions are available under this
item:
None
—Always allow outlets to be turned on.
On Warning
—Do not allow outlets to be turned on when the
Overload Warning Threshold has been exceeded.
On Overload
—Do not allow outlets to be turned on when
theloadexceeds
100
%.
Overload Audible
Alarm
The overload conditions, if any, that will cause the audible
alarm to sound. Once the alarm starts sounding, you can
use the mute button to turn off the alarm or you can clear the
alarm; selecting Disabled will not clear the alarm. The
following actions are available under this item:
Disabled
—Disables the audible alarm.
On Overload
—Sounds the audible alarm when the load
exceeds
100
%.
On Overload Warning
—Sounds the audible alarm when the
load exceeds the Overload Warning Threshold.
Note: When you change settings, the new setting is not
used until the next time the event occurs. For
example, if the overload warning Threshold has
been exceeded and the setting is then changed from
On Overload to On Warning, the audible alarm will
not be activated.
Low Current
Threshold
The threshold for load current below which an SNMP trap is
generated..
Reboot Duration
Longest reboot duration in the set of accessible outlets. You
can change this value only by modifying the reboot duration
of accessible outlets. Used by Sequenced Reboot and
Delayed Sequenced Reboot.
Comments to this Manuals