APC 220 VAC User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Page 7
ceilings is complete, and ambient temperature and humidity conditions are and will be
continuously maintained at values near those indicated for final occupancy.
1. The UPS is capable of withstanding any combination of the following environmental
conditions in which it must operate without mechanical or electrical damage or
degradation of operating characteristics.
a. Storage Ambient Temperature: -4 F to 140 F (-20 C to 60 C)..
b. Operating Ambient Temperature: 0 C to 40 C (32 F to 104 F). 25 C (77 F)
is ideal for most battery types.
c. Relative Humidity: 0% to 95% non-condensing.
d. Altitude:
1) Storage Altitude: 50,000 feet (15000 meters) above sea level
2) Operating Altitude: 10,000 feet (3000 meters) above sea level. At altitude
of 10,000 feet the UPS must be loaded only up to 90% of its nominal
capacity.
e. Audible Noise: Less than 55 dBA at 3 feet (1 meter)
1.7 WARRANTY
A. Limited Warranty: American Power Conversion (APC) warrants the UPS to be free
from defects in materials and workmanship for a period of two years from the date of
purchase,
1. Warranty Limitations:
a. The obligation of APC under this warranty is limited to repairing or replacing,
at its own sole option, any defective product.
b. This warranty does not apply to equipment that has been damaged by
accident, negligence, or misapplication or has been altered or modified in any
way.
c. This warranty applies only to the original purchaser who must have properly
registered the product within 10 days of purchase.
d. EXCEPT AS PROVIDED HEREIN, AMERICAN POWER CONVERSION
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of
implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may
not apply to the purchaser.
e. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL APC BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, APC is
not liable for any costs, such as lost profits or revenue, loss of equipment, loss
of use of equipment, loss of software, loss of data, costs of substitutes, claims
by third parties, or otherwise.
f. This warranty gives you specific legal rights and you may have other rights
that vary from state to state.
2. Warranty Procedures:
a. To obtain service under warranty the purchaser must obtain a Returned
Material Authorization (RMA) number from customer support.
b. Products must be returned with transportation charges prepaid and must be
accompanied by a brief description of the problem encountered and proof of
date and place of purchase.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Basis of Design: Products specified are Smart-UPS On-Line Uninterruptible Power Supplies
as manufactured by APC by Schneider Electric and as listed on page 2 of this specification.
Items specified are to establish a standard of quality for design, function, materials, and
appearance. Equivalent products by other manufacturers are acceptable. The
Architect/Engineer will be the sole judge of the basis of what is equivalent.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments