APC AR2802BLK Datasheet download pdf (Page 21)

18 NetShelter VX Four-Post Open Frame—User’s Manual

Vertical Mounting Rails

Adjusting the

mounting rails

on the frame

posts

1. Use the 5-millimeter Allen wrench (included) to

loosen—but not remove—the socket-head screws in the

slot of the vertical mounting rail.

2. Slide the vertical mounting rail forward or rearward as

desired. Use a level to make sure the mounting rail is

vertical. Tighten each screw.

Repositioning

the rails using

the horizontal

braces

1. Use the 5-millimeter Allen wrench (included) to remove

the socket-head screws in the slots of the vertical

mounting rail.

2. Locate the new position for the vertical mounting rail.

3. Secure the vertical mounting rail to each horizontal

brace.

a. Insert a caged nut into the appropriate holes at the

new position on the upper and lower horizontal brace.

b. Place the mounting rail at the new position and insert

a socket-head screw through the rail, brace, and caged

nut.

c. Tighten the screw to secure the vertical mounting rail

to the brace.

d. Repeat steps a-c for the other side.

5. Repeat steps 1-3 for the opposite side of the enclosure.

arn

To avoid personal injury or damage to the

frame, perform this procedure with no

equipment installed on the vertical mounting

rails.

ote

You may have to adjust the position of the

horizontal brace up or down to align it with

the mounting channel in the rear mounting

rail.

See “How to move a brace” on page 19.

NS UM 990-0398.book Page 18 Tuesday, February 12, 2002 10:26 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

APC AR2802BLK Datasheet Page 21

Comments to this Manuals

Related products and manuals for Racks APC AR2802BLK