APC Battery Management System User Manual download pdf (Page 90)

USER’S GUIDE

Battery Management System

Recipients Option

Trap Receivers

You can define up to four NMSs to be used as trap receivers when an event

occurs that has SNMP traps enabled.

In the Web interface, use the Trap Receiver settings, available through the

Recipients option of the Events menu.

In the control console, use the SNMP option of the Network menu.

Item Definition

Community Name The password (15 characters or less) used when traps are sent

to the NMS identified by the Receiver NMS IP/Domain Name

setting.

Receiver NMS IP/

Domain Name

The IP address or domain name of the NMS to which traps are

sent. If this setting is 0.0.0.0 (the default), no traps are sent to

any NMS.

Generation (Web

interface)

Trap Generation

(control console)

Enables (by default) or disables the sending of any traps to the

NMS identified by the Receiver NMS IP/Domain Name

setting.

Authentication Traps Enables or disables the sending of authentication traps to the

NMS identified by the Receiver NMS IP/Domain Name

setting.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 193 194

No comments

APC Battery Management System User Manual Page 90