APC AP9554 Datasheet download pdf (Page 9)

Before you Begin

Safety &

grounding

information

Read the following information before installing or operating

your

APC

Power Distribution Unit (

PDU

•This

PDU

is intended for indoor use only.

• Do not install this

PDU

where excessive moisture or

heat is present.

• Never install any wiring, equipment, or

PDU

during a

lightning storm.

•Plugthis

PDU

into a three-wire, grounded power outlet

only. The power outlet must be connected to appropriate

branch circuit/mains protection (fuse or circuit breaker).

Connection to any other type of power outlet may result

in a shock hazard.

• Use only the supplied brackets for mounting.

• Do not use an additional extension cord or adapter with

the primary power cord.

• Do not work alone under hazardous conditions.

• Check that the power cord, plug, and socket are in good

condition.

• To reduce the risk of electric shock when you cannot

verify grounding, disconnect the

PDU

from the power

outlet before installing or connecting equipment.

Reconnect to the power outlet only after you have made

all connections.

• Pluggable equipment includes a protective earth

connector which carries the leakage current from the

load devices (computer equipment). Do not exceed a

total leakage current of 3.5 mA.

• Do not handle any kind of metallic connector before the

power has been removed.

• Use one hand, whenever possible, to connect or

disconnect signal cables to avoid a possible shock from

touching two surfaces with different grounds

• This unit contains no user serviceable parts. Repairs are

performed only by factory-trained service personnel.

• Always install the equipment as shown in the User

Manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Comments to this Manuals

No comments

APC AP9554 Datasheet Page 9

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC AP9554