APC Smart-UPS C 1000VA 2U LCD 120V Specifications download pdf (Page 7)

Smart-UPS C 1000/1500 VA 120 V Rack-Mount 2U 5

Status Indicators

Front panel features



Online/On Battery LED



POWER ON/OFF button



Site Wiring/System Fault LED



Display interface



ISPLAY button



UTE button

Note: Refer to Feature Quick-Reference

on page 7 for a detailed description of the

front panel buttons.

On Line: The UPS is supplying conditioned utility power to connected equipment.

Green mode: The UPS is operating at the most efficient level by bypassing unused AVR components

while acceptable utility voltage is present. The UPS will enter and exit Green mode automatically and will

not compromise power protection.

Load Capacity: The load capacity percentage is indicated by the number of load bar sections illuminated.

Each bar represents 20% of the load capacity.

Estimated Run Time: This indicates the battery runtime minutes that remain if the UPS switches to

battery power.

Battery Charge: The battery charge level is indicated by the number of load bar sections illuminated.

When all five blocks are illuminated, the battery is fully charged. Each bar represents 20% of the battery

charge capacity.

Overload: The equipment connected to the UPS is drawing more power than the voltage rating allows.

Event: The event counter indicates the number of events that occurred to cause the UPS to switch to

battery operation.

Automatic Voltage Regulation (AVR): The UPS has an AVR boost feature that automatically regulates

low levels of input voltage without using battery power. When illuminated, the UPS is compensating for

low input voltage.

In: Input voltage.

Out: Output voltage.

System Faults: An internal system fault has occurred. The fault number will illuminate on the display.

Refer to System Faults on page 6.

Mute: An illuminated line through the icon indicates that the audible alarm is disabled.

Replace Battery: The battery is nearing the end of its service life. Replace the battery.

On Battery: The UPS is supplying battery backup power to the connected equipment.

su0740b

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

APC Smart-UPS C 1000VA 2U LCD 120V Specifications Page 7

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC Smart-UPS C 1000VA 2U LCD 120V