APC SMT750R2-NMC Specifications download pdf (Page 3)

1Smart-UPS 750-3000 VA 100/120/208/230 Vac Rack-Mount

Overview

Product Description

The APC

by Schneider Electric Smart-UPS

750-3000 VA Rack-Mount is a high performance

uninterruptible power supply (UPS). It provides protection for electronic equipment from utility power

blackouts, brownouts, sags, and surges; small utility fluctuations and large disturbances. The UPS also

provides battery backup power until utility power returns to safe levels or the batteries are fully

discharged.

Safety and General Information

Read the Safety Guide included in the package before installing the UPS.

This unit is intended for indoor use only.

Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient

temperatures, poor quality utility power, and frequent short duration discharges will shorten battery life.

Connect the Smart-UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

The batteries are heavy. Remove the batteries prior to installing the UPS in a rack.

Always install the external battery packs (XLBPs) at the bottom of the rack. The UPS must be installed above the

XLBPs.

Specifications

For additional specifications, refer to the APC Web site at www.apc.com.

Environmental

Temperature

Operating 0° to 40° C (32° to 104° F)

Storage -15° to 45° C (5° to 113° F)

charge UPS battery every six months

Maximum

Elevation

Operating 3,000 m (10,000 ft)

Storage 15,000 m (50,000 ft)

Humidity

0% to 95% relative humidity, non-condensing

1 2 3 4 5 6 7 8 ... 19 20

No comments

APC SMT750R2-NMC Specifications Page 3