APC SUA2200RMI2U/KIT User Manual download pdf (Page 8)

FEATURE FUNCTION

Self-Test Automatic: The UPS performs a self-test automatically when turned on, and every

two weeks thereafter, (by default). During the self-test, the UPS briefly operates

the connected equipment on battery.

Manual: Press and hold the

button for a few seconds to initiate the self-test.

Cold Start

208/120/230 V

models Only

When there is no utility power and the UPS is off, the cold start feature will switch

the UPS and connected equipment onto battery power, (see Troubleshooting).

Diagnostic Utility

Voltage

The UPS has a diagnostic feature that displays the utility voltage.

The UPS starts a self-test as part of this procedure. The self-test does not af-

fect the voltage display.

Press and hold the

button to view the utility voltage bar graph display. After a

few seconds, this five-LED battery charge

display on the right of the front

panel will show the utility input voltage.

Refer to the figure at left for the voltage reading, (values are not listed on the

UPS).

The display indicates the voltage is between the displayed value on the list and the

next higher value, (see Troubleshooting).

Battery Operation

The UPS switches to battery operation automatically if the utility power fails. While running on bat-

tery, an alarm beeps four times every 30 seconds.

Press the

button to silence this alarm. If the utility power does not return, the UPS continues to

supply power to the connected equipment until the battery is fully discharged.

If PowerChute is not being used, files must be manually saved and the computer must be turned off

before the UPS fully discharges the battery.

The UPS battery life differs based on usage and environment. Refer to www.apc.com

for on battery

runtimes.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

No comments

APC SUA2200RMI2U/KIT User Manual Page 8