APC SUVT10KF2B4S Datasheet download pdf (Page 34)

28 Smart-UPS® VT 10-30 kVA, 208/220 V Site Preparation and Installation Manual 990-1598B

Input/Output Wiring – Single Mains (default)

The UPS is designed for both single (default) and dual mains installations. Follow the below steps to

install the UPS in a single-mains installation.

Wiring procedure – single mains



Loosen the (6) M4 screws from the cover of the cable termination area on the rear, and remove.



Loosen the (2) M4 screws (1 each side) from the top part of the Conduit Box. Loosen the M4

screws attaching it to the bottom part (2 screws in a 13.8 5in/352 mm Enclosure, 3 screws in a

20.59 in/523 mm Enclosure), and remove.

Note

The illustrations show a 20.59 in/523 mm Enclosure, but installation procedures are

identical for 13.85 in/352 mm Enclosures).



Conduit box

(bottom part)

Conduit box

(top part)













Output

Input

EPO

Conduit

MBP

Conduit

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

No comments

APC SUVT10KF2B4S Datasheet Page 34