APC SU1400XLT User Manual download pdf (Page 24)

--enable-snmp

Turns on generation of the SNMP driver. This

driver accesses the UPS over the network using

SNMP. This is compatible only with UPSes

equipped with an SNMP or Web/SNMP

management card. By default this is enabled.

--enable-net-snmp

Turns on generation of the obsolete NET-SNMP

driver. This driver was the precursor to the current

snmp driver and is now obsolete. It is available as

a fallback if the new driver cannot be used for

some reason. By default this is disabled.

--enable-pcnet

Turns on generation of the PCNET (PowerChute

Network Shutdown) driver. This driver accesses

the UPS over the network using APC's custom

protocol. This driver can be used as an alternative

to SNMP for UPSes equipped with a modern

Web/SNMP management card.

--enable-modbus

Turns on generation of the MODBUS/RS232

driver (default)

--enable-modbus-usb

Turns on generation of the MODBUS/USB driver

--enable-test

This turns on a test driver that is used only for

debugging. By default it is disabled.

--enable-gapcmon

This option enables building the GTK GUI

front-end for apcupsd. Building this package

requires numerous GNOME libraries. The default

is disabled.

--enable-apcagent

This option enables building the apcagent

menubar application on Mac OS X platforms. The

default is disabled.

--with-libwrap=path, --with-libwrap

This option when enabled causes apcupsd to be

built with the TCP WRAPPER library for enhanced

security. In most cases, the path is optional since

configure will determine where the libraries are on

most systems.

--with-nologin=path

This option allows you to specify where apcupsd

will create the nologin file when logins are

prohibited. The default is /etc

--with-pid-dir=path

This option allows you to specify where apcupsd

will create the process id (PID) file to prevent

multiple copies from running. The default is

system dependent but usually /var/run.

--with-log-dir=path

This option allows you to specify where apcupsd

will create the EVENTS and STATUS log files.

The default is /etc/apcupsd. This option simply

sets the default of the appropriate path in the

apcupsd.conf file, which can be changed at any

later time.

--with-lock-dir=path

This option allows you to specify where apcupsd

will create the serial port lock file. The default is

system-dependent but usually /var/lock. This

option simply sets the appropriate path in the

apcupsd.conf file, which can be changed at any

later time.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 114 115

Comments to this Manuals

No comments

APC SU1400XLT User Manual Page 24

Comments to this Manuals