APC SU1400XLT User Manual download pdf (Page 46)

to relocate hosts.conf and apcupsd.css from the apcupsd install location to

\apcupsd\etc\apcupsd on the appropriate drive.

multimon.cgi

This program monitors multiple UPSes at the same time. A typical output of multimon.cgi as displayed in

your Web browser might look like the following:

The machines monitored as well as the values and their column headings are all configurable (see

/etc/apcupsd/hosts.conf and /etc/apcupsd/multimon.conf)

upsstats.cgi

By clicking on the system name in the multimon.cgi display, you will invoke upsstats.cgi for the specified

system, which will produce a bar graph display of three of the monitored values. For example,

You can display different bar graphs by selecting different variables from the drop down menus at the top

of each of the three bar graphs.

As with multimon, if you have your local host configured in the /etc/apcupsd/hosts.conf file, you can

execute it from a Unix shell from the source cgi directory as follows:

./upsstats.cgi

As with multimon, quite a few lines of html should then be displayed.

upsfstatus.cgi

If you would like to see all of the STATUS variables available over the network, click on the Data field of

the desired system, and your browser will display something like the following:

APC : 001,048,1109

DATE : Thu Dec 02 17:27:21 CET 1999

HOSTNAME : matou.sibbald.com

RELEASE : 3.7.0-beta-1

CABLE : Custom Cable Smart

MODEL : SMART-UPS 1000

UPSMODE : Stand Alone

UPSNAME : UPS_IDEN

LINEV : 223.6 Volts

MAXLINEV : 224.9 Volts

MINLINEV : 222.3 Volts

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 114 115

No comments

APC SU1400XLT User Manual Page 46