APC SU1400XLT User Manual download pdf (Page 58)

changeme

When apcupsd detects that the mains are on, but the battery is not functioning correctly, this event is

generated. It is repeated every x hours.

Default: wall a message

commfailure

This event is generated each time the communications line with the computer is severed. This event

is not detected on dumb signaling UPSes.

Default: wall a message

commok

After a commfailure event is issued, when the communications to the computer is re-established, this

event will be generated.

Default: wall a message

doreboot

This event is depreciated and should not be used.

Default: Shuts down the system using shutdown -h or similar

doshutdown

When the UPS is running on batteries and one of the limits expires (time, run, load), this event is

generated to cause the machine to shutdown.

Default: Shuts down the system using shutdown -h or similar

emergency

Called for an emergency system shutdown. (What triggers such a shutdown is unclear...) After

completing this event, apcupsd will immediately initiate a doshutdown event.

Default: wall a message

failing

This event is generated when the UPS is running on batteries and the battery power is exhausted.

The event following this one will be a shutdown.

Default: wall a message

loadlimit

This event is generated when the battery charge is below the low limit specified in the apcupsd.conf

file. After completing this event, apcupsd will immediately initiate a doshutdown event.

Default: wall a message

powerout

This event is generated immediately when apcupsd detects that the UPS has switched to batteries. It

may be due to a short powerfailure, an automatic selftest of the UPS, or a longer powerfailure.

Default: wall a message

onbattery

This event is generated 5 or 6 seconds after an initial powerfailure is detected. It means that apcupsd

definitely considers the UPS to be on batteries. The onset of this event can be delayed by the

ONBATTERYDELAY apcupsd.conf configuration directive.

Default: wall a message

offbattery

This event is generated when the mains return only if the onbattery event has been generated.

Default: wall a message

mainsback

This event is generated when the mains power returns after a powerout condition. The shutdown

event may or may not have been generated depending on the parameters you have defined and the

length of the power outage.

Default: nothing

remotedown

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 114 115

Comments to this Manuals

No comments

APC SU1400XLT User Manual Page 58

Comments to this Manuals