Apc AP9608 User Manual download pdf (Page 12)

Note the top line, which displays the model number of the

UPS that is

currently connected . Site

ID and Location are user configuration items.

The display shows the factory defaults.

Press any key to bring up the Main menu:

---------------------- MAIN MENU ------------------------

Date: Dec-16 '97 Time: 08:39:36

1- UPS Status

2- UPS Control

3- UPS Characteristics

4- Data/Event Logging

5- Call-UPS Settings

6- Paging Setup

7- Measure-UPS Info

?- Help

<ENTER> Display Menu

<ESC> End Session

Customize Settings

From the Main menu, you can go to the various menus by pressing the

number associated with each of them. Press 5, then

ENTER to bring up

the Call-

UPS Settings menu. Set the date, time, password, location, and

baud rate from this menu. The baud rate should be set at

9600. The other

menu items can be left alone for now. Note that any changes you make

are displayed when you return to the menu.

Then press

ESC to return to the Main menu. Type 6 and press ENTER for

the Paging Setup menu, where you can change the Site

ID number from

its default setting. If you will be using the paging capability of Call-

UPS

II, use this menu to enable and set up paging.

If you plan to use Call-

UPS II for logging, go to the Main menu, type 4

and press

ENTER for the Data/Event Logging menu. Proceed from there

to set up logging.

To change any of the changeable setting of the UPS and Call-UPS II, use

the other menus listed in the Main menu. For a full description of the en-

tire menu scheme, see Section 4.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments

Apc AP9608 User Manual Page 12

Comments to this Manuals

Related products and manuals for Hardware Apc AP9608