Apc AP9608 User Manual download pdf (Page 27)

You can choose a numbered item to change its current setting. Type its

corresponding number and press

ENTER. Press SPACEBAR when

prompted to cycle through the settable values. Press

ENTER to confirm

any change and return to the

UPS Characteristics menu.

The following table gives a description of the settings on the UPS Char-

acteristics menu. Those marked with a † are non-settable characteristics.

UPS CHARACTERISTICS (Smart-UPS and Matrix UPS)

Setting Description

Model

†

Model name of the connected UPS.

UPS Dip

Switches

†

Hexadecimal display of the UPS switch settings for those

UPSs that have them. Used by technical support.

Note:

Call-UPS II will not allow changes to UPS characteristics

if this value is other than 0.

UPS S/N

†

Serial number of the UPS.

F/W Rev

†

Revision number of the firmware in the UPS.

UPS ID

Identification of the UPS (not settable through Call-UPS

Manuf. Date

†

Date of manufacture of the UPS.

Output

Rated output voltage of the UPS. Settable for UPSs that

allow change of output voltage. You will be prompted to

select from the choices displayed.

Battery Date

Date of the last battery replacement (not settable through

Call-UPS

Low Transfer

Lowest allowed utility line voltage before transfer to battery

operation. Consult your UPS and computer manuals for

proper setting.

Note: Matrix-UPS does not allow setting low

transfer voltage

High Transfer

High utility line voltage setting for transfer to battery

operation. Consult your UPS and computer manuals for

proper setting.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Comments to this Manuals

No comments

Apc AP9608 User Manual Page 27

Comments to this Manuals

Related products and manuals for Hardware Apc AP9608