Apc AP9608 User Manual download pdf (Page 24)

4.3 UPS Control

For remote control of the connected UPS, go to the Main menu and type 2

and press

ENTER. Call-UPS II displays the Control menu.

Select from the menu items to perform the following:

UPS CONTROL

Command Description

Turn UPS ON

Restores power to the load.

Turn UPS OFF

Cuts off power to the load immediately. This does not

allow for graceful shutdown for operating systems that

require it.

UPS Self Test

Starts a UPS self test and displays the results.

Simulate Power

Failure

Puts the UPS on battery for a moment as if there were a

power failure.

Graceful

Reboot

Causes the UPS to cycle power to the attached computer

to reboot it. Call-UPS

signals that the UPS is on

battery and that the battery is nearly exhausted. Graceful

Reboot uses the value set for Low Battery Duration. See

UPS Characteristics table, Sec. 4.4.

--------------------- CONTROL MENU ----------------------

1- Turn UPS ON

2- Turn UPS OFF

3- UPS Self Test

4- Simulate Power Failure

5- Graceful Reboot

6- Graceful Turn OFF

7- Start Runtime Cal (Stop Runtime Cal)

8- Put UPS in Bypass (Return from Bypass)

?- Help

<ENTER> Display menu

<ESC> Return to Previous menu

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

No comments

Apc AP9608 User Manual Page 24