APC AP9268 User Manual download pdf (Page 22)

On-Screen Display Operations

Add Channel

Name

Scan Dwell Time

ID Dwell Time

APC KVM Switch

Address

ESC = exit

Save Changes

Enter = activate

THE ADD CHANNEL WINDOW

Basic Channel Maintenance is performed from the Administrator Command Menu,

and is available if you are operating in non-secure mode or if you are the system

administrator. Here you can add, delete or edit individual channels.

Adding Channels

4.4 Basic Channel Maintenance

1. Select ‘Add Channel’ from the Administrator Command Menu or press

the Insert key. Type in a new channel name, up to 14 characters long,

and press Enter.

2. Type in the address for the computer you are naming and press Enter. Please

note that the address cannot be longer than two letters.

3. Enter the dwell time for the ID Window and press Enter.

4. Enter the dwell time for scanning and press Enter.

5. After selecting “ID Setup”, use the arrow keys, position the ID window

to where you would like it to appear when this channel is selected.

Then press Enter. (For further information see ‘The ID Window’ later

in this chapter.)

Press Esc at any point to exit this operation without adding the channel.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

No comments

APC AP9268 User Manual Page 22