APC AP9268 User Manual download pdf (Page 40)

Appendices

Conﬁ gure your terminal program to the following settings:

38,400 Baud

8 Bits

No Parity

1 Stop Bit

No Flow Control

Activate the OSD menu on your APC KVM Switch by tapping the Control key

twice. Enter Control twice more to activate the Administrator Commands screen

and then select Administrator Functions.

Use the down arrow key to highlight the menu selection for FLASH Upgrade,

then hit Enter.

A menu screen will appear and ask if you wish to continue. You must type out the

word ‘Yes’ before proceeding. Once you have done this, the Switch will go into

a standby mode and wait for data from the computer. (Note: The keyboard, video

and mouse are disabled during the FLASH upgrade.)

The ﬁ nal step is to send the FLASH ﬁ le from your terminal program. To do this,

you will need to use the transfer function of your communications software.

Send the FLASH ﬁ le using the XMODEM protocol. The transfer should be

completed within four minutes.

The APC KVM Switch will automatically check the upgrade and make sure

that it is valid. If the Switch detects an error it will abort the upgrade and

prompt you to re-transfer the ﬁ le. Otherwise, it will return the message “Flash

Upgrade Successful”.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 48 49

No comments

APC AP9268 User Manual Page 40