APC AP9606 User's Guide download pdf (Page 41)

Web/SNMP Management SmartSlot Card User’s Guide 41

Device Manager Menus

UPS Control Options

Silcon DP300E

series UPS

Three control actions are available for a Silcon DP300E series UPS.

Note:

Only the

Reset UPS to Defaults

option is available by default.

To enable the turn-off options, do the following:

1. Access the Control Console from a local computer which has a

direct, serial-cable connection with the Management Card, as

described in

Local (serial) access on page 15

Note:

You cannot use the Web interface or Telnet access to

the Control Console to enable the turn-off options.

2. Select the

Device Manage

r option from the

Control Console

menu.

3. Select the Silcon DP300E option.

4. Select the

Control

option.

5. Enable the turn-off options.

6. Use C

TRL

-C to return to the

Control Console

menu.

7. Log out to have the change take effect.

You can use the Web interface or Telnet to disable the turn-off options,

but you must use local access to the Control Console to enable them

again.

Continued on next page

Action Definition

Turn UPS Off

Turns the

UPS

off after the expiration of the

Shutdown Delay

described in the table in

Shutdown parameters on page 45

Turn UPS Off

Gracefully

Causes the

UPS

to turn off after PowerChute plus has time to

shut down the server’s operating system safely.

Reset UPS To

Defaults

Resets all

UPS

parameters to their default settings.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 83 84

Comments to this Manuals

No comments

APC AP9606 User's Guide Page 41

Comments to this Manuals

Related products and manuals for Networking APC AP9606