APC AP9606 User's Guide download pdf (Page 60)

Web/SNMP Management SmartSlot Card User’s Guide 60

Events Menu

How to Configure Individual Events

continued

Event mask

Use the codes identified in the following table to configure an event. For

example, to configure the UPS on battery event, as follows:

• To configure it as a severe event, change the 1st character to 3.

• To log the event, and send traps to trap receivers 1 and 2,

change the 2nd character to B.

• To disable traps to receivers 3 and 4, and disable Email recipi-

ents 1 and 2, change the 3rd character to 0.

• To send Email only to Email recipient 3, change the 4th charac-

ter to 8.

Note:

The result would be a code of 3B0800.

Character Event Mask Code Format

1st

(Left-

Most)

Defines the severity code for the event.

(0000): No severity

(0001): Informational

(0010): Warning

(0011): Severe

2nd

Defines whether the event is logged, and whether SNMP traps are

sent to trap receivers 1 and 2.

(0000): Disable logging and SNMP traps

(0001): Disable logging, send traps to receiver 2

(0010): Disable logging, send traps to receiver 1

(0011): Disable logging, send traps to both receivers

(1000): Enable logging, disable SNMP traps

(1001): Enable logging, send traps to receiver 2

(1010): Enable logging, send traps to receiver 1

(1011): Enable logging, send traps to both receivers

3rd

Controls the sending of SNMP traps to trap receivers 3 and 4, and

Email notifications to Email recipients 1 and 2.

(0000): Disable traps and Email

(0001): Disable traps, send Email to recipient 2

(0010): Disable traps, send Email to recipient 1

(0011): Disable traps, send Email to both recipients

(0100): Send traps to receiver 3, disable Email

(0101): Send traps to receiver 3, Email to recipient 2

(0110): Send traps to receiver 3, Email to recipient 1

(0111): Send traps to receiver 3, Email to both recipients

(1000): Send traps to receiver 4, disable Email

(1001): Send traps to receiver 4, Email to recipient 2

(1010): Send traps to receiver 4, Email to recipient 1

(1011): Send traps to receiver 4, Email to both recipients

(1100): Send traps to both receivers, disable Email

(1101): Send traps to both receivers, Email to recipient 2

(1110): Send traps to both receivers, Email to recipient 1

(1111): Send traps to both receivers, Email to both recipients

4th

Defines whether the event sends Email notifications to Email

recipients 3 and 4.

(0000): Disable Email

(0100): Send Email to recipient 4

(1000): Send Email to recipient 3

(1100): Send Email to both recipients

5th and 6th

Reserved for future use. Always map as 00.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 83 84

Comments to this Manuals

No comments

APC AP9606 User's Guide Page 60

Comments to this Manuals

Related products and manuals for Networking APC AP9606