APC AP9606 User's Guide download pdf (Page 42)

Web/SNMP Management SmartSlot Card User’s Guide 42

Device Manager Menus

UPS Control Options

continued

Smart-UPS,

Matrix-UPS, and

Symmetra

Power

Array

The Smart-UPS, Matrix-UPS, and Symmetra Power Array

Control

options are identical, with one exception: Symmetra Power Array and

Matrix-UPS use a bypass mode; Smart-UPS does not.

Note:

For information about the

Sleep Time

setting which appears in

the Web interface’s “Control” and “Configuration” pages, see

the table in

Shutdown parameters on page 45

With one exception, control actions are accessed through the

Control

menu in the Web interface and the Control Console. The

Reset UPS To

Defaults

is a

Configuration

menu option in the Control Console.

Note:

Use the

Control

menu in the Control Console to access the

diagnostic tests which are accessed through the

Diagnostics

option in the Web interface. For descriptions of the

Self-Test

Simulate Power Failure

Start/Stop Runtime Calibration

, and

Test UPS Alarm

options, see

UPS Diagnostics Options on

page 40

Action Definition

Turn UPS On

Turns the

UPS

on.

Turn UPS Off

Turns the

UPS

off after the

Shutdown Delay

described in the

table in

Shutdown parameters on page 45

Turn UPS Off

Gracefully

Causes the

UPS

to turn off after PowerChute plus has time to

shut down the server’s operating system safely.

Reboot UPS

Reboots the attached equipment by immediately causing the

UPS

to turn off and then back on again.

Reboot UPS

Gracefully

Reboots the attached equipment by causing the

UPS

to turn

off and then back on again, after PowerChute plus has time to

safely shut down the server’s operating system.

Put UPS To Sleep

Turns the

UPS

immediately off for the period of time defined by

the

Sleep Time

setting described in the table in

Shutdown

parameters on page 45

Put UPS To Sleep

Gracefully

Turns the

UPS

off for the period of time defined by the

Sleep

Time

setting described in the table in

Shutdown parameters

on page 45

, after PowerChute plus has time to safely shut

down the server’s operating system.

Put UPS In/Take

UPS Off Bypass

Controls the use of bypass mode, which allows some

maintenance to be performed at a Matrix-UPS or Symmetra

Power Array model without turning off the

UPS

Reset UPS To

Defaults

Resets all

UPS

parameters to their default settings.

For information about the

Low-Battery Shutdown

parameter that defines how

much time PowerChute plus has available to shut down the server safely, see the

table in

Shutdown parameters on page 45

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Comments to this Manuals

No comments

APC AP9606 User's Guide Page 42

Comments to this Manuals

Related products and manuals for Networking APC AP9606