APC RAID Subsystem SCSI-SATA II Specifications Page 87
- Page / 100
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Falcon 24 Bay SCSI-SATA Installation and Hardware Reference Manual
B.4. Connecting the UPS to the Subsystem
B.4.1 Connect the PSU Module Power Cords
The three (3) power cords shipped with the subsystem must be plugged into the power
cord sockets in the rear of the PSU modules. The plug at the other end of the power cord
must be inserted into a socket on the UPS. Please refer to the documentation that came
with your UPS device to determine the location of these sockets. The UPS must then be
connected to main power.
B.4.2 Set the Baud Rate
The default baud rate for the COM 2 serial port is 38400 and must be changed to 2400 or
other rate specified by the UPS specifications. To see how to change the baud rate, please
refer to the Generic Operation Manual that came with the subsystem.
B.4.3 Connect COM2
The separate audio jack-to-DB9 serial cable is used to connect the COM2 ports on the
controller modules to the UPS directly. The cable is used to transmit UPS status updates
to the controller modules and will in turn determine the write policy of the controller
module. To connect the serial communication cable to the subsystem controller, insert the
audio jack connector on one end of the cable into the COM2 port on the controller
module. To see how to connect the DB9 connector to the UPS, please refer to the
documentation that came with your UPS.
Figure B-2: Connecting the UPS to the Subsystem
B-2 Connecting the UPS to the Subsystem
- Falcon 24 Bay 1
- Table of Contents 2
- Safety Precautions 6
- About This Manual 7
- Revision History 7
- Who should read this manual? 7
- Conventions 8
- Software and Firmware Updates 9
- Chapter 1 10
- Introduction 10
- 1.1.2 Enclosure Chassis 11
- 1.1.2.1 Chassis Overview 11
- CAUTION! 12
- 1.1.2.2 Physical Dimensions 12
- 1.1.2.3 Front Panel Overview 13
- 1.1.2.4 Drive Slot Numbering 14
- 1.1.2.5 Rear Panel Overview 14
- 1.2. Subsystem Components 15
- 1.2.2 Drive Trays 16
- WARNING! 16
- 1.2.3 RAID Controller Module 17
- 1.2.5 DIMM Module 18
- 1.2.6 BBU Module 19
- 1.2.7 Power Supply Units 20
- 1.2.8 Cooling Modules 21
- 1.3. Subsystem Monitoring 22
- 1.4. Hot-swappable Components 23
- 1.4.3 Normalized Airflow 24
- Chapter 2 25
- Hardware Installation 25
- 2.3. Static-free Installation 26
- 2.5. Unpacking the Subsystem 28
- Considerations: 29
- WARNING! 30
- 2.7. Hard Drive Installation 34
- 2.8. Drive Tray Installation 35
- Chapter 3 43
- Subsystem Monitoring 43
- 3.2. Status-indicating LEDs 44
- 3.2.2 Controller Module LEDs 45
- 3.2.3 LAN Port LEDs 46
- 3.2.4 LCD Keypad Panel 46
- 3.2.5 Drive Tray LEDs 48
- 3.2.7 PSU Module LED 49
- 3.3. Audible Alarm 50
- C Monitoring 51
- Subsystem Connection and 52
- Operation 52
- 4.1.3 SCSI Termination 53
- 4-5: LCD Keypad Navigation 55
- 4.2 Connection Topology 57
- 4.3 Power On 61
- 4.3.2 Power On Procedure 62
- 4.3.4 Power On Status Check 63
- 4.3.5 LCD Screen 64
- 4.4 Power Off Procedure 65
- Chapter 5 66
- Subsystem Maintenance and 66
- Upgrading 66
- 5.2.1 Overview 68
- CAUTION! 73
- 5.4.2 Replacing a PSU Module 76
- 5.6. Drive Tray Maintenance 79
- 5.6.2 Hard Drive Replacement 80
- Appendix 81
- Subsystem Specifications 81
- A.2.1 Configuration 83
- A.2.2 Architecture 83
- A.6. RAID Management 85
- Appendix B 86
- Uninterruptible Power Supply 86
- B.4.2 Set the Baud Rate 87
- B.4.3 Connect COM2 87
- B.5. Power On 88
- B.6. UPS Status Monitoring 88
- B.6.2 UPS Messages 89
- B.6.3 UPS Message Summary 90
- Appendix C 91
- Spare Parts and Accessories 91
- Appendix D 93
- D.2. DB9 Audio Jack Pinouts 94
- Definitions 95
- D.3. Ethernet Port Pinouts 96
- D.4. Main Power 96
- Index I--1 97
- -2 Index 98
- Index I--3 99
- -4 Index 100
Related products and manuals for Networking APC RAID Subsystem SCSI-SATA II
Networking APC AP9606 Quick Start Manual
(20 pages)
(20 pages)
Networking APC AP9312TH User's Guide
(32 pages)
(32 pages)
Networking APC AP9608 Installation Manual
(32 pages)
(32 pages)
Networking APC 66123 Installation Manual
(16 pages)
(16 pages)
Networking APC AP9630 User's Guide
(85 pages)
(85 pages)
Networking APC IP DSLAM User's Guide
(67 pages)
(67 pages)
Networking APC AP9630 User Manual
(117 pages)
(117 pages)
Networking APC AP9630 User Manual
(32 pages)
(32 pages)
Networking APC AP9224110 Specifications
(16 pages)
(16 pages)
Networking APC AP9608 Specifications
(9 pages)
(9 pages)
Networking APC AP9608 User Manual
(4 pages)
(4 pages)
© 2020, manymanuals.com. All rights reserved. | 0.278 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals