APC SBPSU10K30FC1M1-WP Installation Manual download pdf (Page 5)

1Smart-UPS® VT and MGE™ Galaxy™ 3500 10-30 kVA 208 V MBP Installation

Safety

SAVE THESE INSTRUCTIONS

This manual contains important instructions for the Smart-UPS

VT and MGE™ Galaxy™ 3500 series

that should be followed when handling the Maintenance Bypass Panel with Power Distribution (wall-

mount).

This UL-listed unit was designed to operate in conjunction with the Smart-UPS VT and MGE Galaxy

3500 10-30kVA, 208V UPS.

Safety warnings

Warning: Only APC by Schneider -trained personnel who are familiar with the

construction and operation of this equipment, as well as the mechanical and electrical

hazards involved, may perform this installation.

Warning: This installation must comply with the requirements of ANSI/NFPA 75 and

NEC/NFPA 79 Art. 645.

Warning: All safety codes, safety standards, and other regulations must be strictly

observed during installation and ongoing maintenance of this equipment.

Warning: Prior to installing the Smart-UPS VT or MGE Galaxy 3500 Maintenance

Bypass Panel, de-energize all external power being supplied to the UPS!

Warning: Ensure that no electrical power is connected to the Maintenance Bypass

Panel, and that all switches are in the OFF position before installing or servicing this

unit!

Warning: All wiring instructions must be followed precisely. Failure to comply could

result in permanent damage to the equipment!

Warning: When installing this unit to a wall, avoid contact with previously installed

electrical wires and other potential hazards that might be embedded in the wall!

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

APC SBPSU10K30FC1M1-WP Installation Manual Page 5