APC AP9606 Specifications download pdf (Page 66)

58 Implementing UPS Configurations with Microsoft Cluster Server

both APC SMART-UPS 5000 for redundancy. The hubs are connected only to one

APC SMART-UPS 5000 because they have only one power supply. Each Netfinity

is connected with its UPS via a black serial cable (940-0024C).

The left node is named NF8500L, the right node NF8500R.

3.3.5 Preparing both nodes

To implement our solution, additional files are necessary, as follows:

1. Create a new directory C:\UPS_CMD.

2. For Windows NT, download the file UPS.CMD as described in Appendix A,

“Downloading the additional material” on page 73. For Windows 2000,

download UPS.CMD.W2K and rename it to UPS.CMD.

3. Download the DELAY3.EXE as described in Appendix A, “Downloading the

additional material” on page 73.

4. Copy the file SHUTGUI.EXE from the Windows NT Resource Kit CD to

C:\UPS_CMD.

As result, you should have a directory similar to Figure 56.

Figure 56. Directory view

3.3.6 Installing PowerChute PLUS on both nodes

Each node is connected via a black smart-signaling cable to their corresponding

UPS; thus, the installation is identical on both nodes. The following steps have to

be made on both nodes:

1. Install PowerChute PLUS 5.2 for Windows NT 4.0. You can download

PowerChute PLUS from:

http://www.apcc.com/tools/download/

C:\>tree ups_cmd /f

Directory PATH listing for volume NTWKS

Volume serial number is 0012FC94 166F:1BD3

C:\UPS_CMD

ups.cmd

shutgui.exe

delay3.exe

No subdirectories exist

C:\>

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 95 96

No comments

APC AP9606 Specifications Page 66