APC 10-30 KVA Installation Manual download pdf (Page 10)

20 kVA - 80 kVA UPS

User’s and Installation Manual

1015543

Revision D

5. Unpacking and handling

5.1 Unpacking and incoming inspection

Unpack the equipment and remove all the packing materials and shipping cartons.

• The equipment must be inspected for damage after shipment. If damage has occurred

during transit, all the shipping cartons and packing materials should be stored for

further investigation. If the damage is visible a claim for shipping damage must be filed

immediately.

To file a claim for shipping damage:

• The carrier must be informed within 7 days of receipt of the equipment.

The equipment must be checked against the packing list to verify that the shipment is

complete.

The UPS is thoroughly inspected at the factory. If there are no damages or discrepancies, the

installation may proceed.

Removing the equipment from the pallet (see figure 3):

Figure 3. Unloading the UPS from pallet.

Removing the UPS and battery cabinet from pallet

5.2 Moving

The UPS units are equipped with castors, for easy movement. The unit is simply pushed into

place. Because the UPS is heavy, it should be verified that surfaces on which it is moved are

strong enough. When wheeling the UPS, be careful not to tilt it.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

No comments

APC 10-30 KVA Installation Manual Page 10