User Manual 990-9178A
DC MX06 40A Shelf Page 27 of 44 18
th
FEB 02
4.1.2.2 Front Access Connection
To connect the input supply to the MX06 40A Shelf proceed as follows:
• Ensure that the AC supply intended for connection is isolated, locked off and under single
operator control.
• The main circuit board should have been configured for an AB Feed by removing LK3 and
LK4. This is normally factory configured.
• Strip the ends of the AC Input cables to be connected to the input terminal block.
• By unscrewing the 2 front panel screws the AC Input connection drawer can be opened as
shown below. The AC Input cable is fed through the gland and screwed into the terminal
block visible.
• Connect as follows: Safety earth to position marked with earth symbol (connect first)
Feed A Live to AC1
Feed A Neutral to AC2
Feed B Live to AC3
Feed B Neutral to AC4
• The alarm card adjacent to the AC Input drawer may need to be removed for easier access
to the terminal block screws.
• A strain relief bush can be fitted instead of the standard cable gland shown. Contact factory
for details.
Cable Gland
Terminal Block
Comments to this Manuals