APC SURT15KRMXLI + Service Bundle 3 Specifications download pdf (Page 12)

SURT15k/20k 230 VAC Stack/Rack-Mount 6U XLI/XLICH/XLI-CC8

Hardwire the UPS

Wiring must be performed by a qualified electrician. Adhere to all local and national electrical codes.

1. For input wiring only, install a utility circuit breaker in accordance with local electrical codes.

2. Switch the utility circuit breaker OFF.

3. Remove the appropriate circular knockouts from the input and output wiring trays.

4. Remove the screws that secure the covers and take the covers off of the trays.

5. Remove the five screws that secure the strain relief bar.

6. Remove the appropriate jumpers for input power source compatibility and output wiring options, (refer to

“Wiring Specifications” on page 10 in this manual).

7. Insert the cables through the knockout holes to the terminal blocks. Connect the ground terminal first,

(refer to “Wiring Specifications” on page 10 in the this manual).

8. Use an appropriate strain-relief (not supplied), on the hardwired input and output power cables.

9. Replace the wiring tray covers. Failure to do so may result in personal injury or equipment damage.

10. Install the wiring trays, (refer to graphics below).

11.

suo0672a

SUO0671A

Input Wiring Tray

Output Wiring Tray

Strain Relief Bar

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

No comments

APC SURT15KRMXLI + Service Bundle 3 Specifications Page 12