APC SURT15KRMXLI + Service Bundle 3 Specifications download pdf (Page 8)

SURT15k/20k 230 VAC Stack/Rack-Mount 6U XLI/XLICH/XLI-CC4

Stack configuration

The UPS and the XLBPs must be connected with ground wires. Refer to the XLBP user manual for details.

Rack-mount configuration

Install rails in rack

For details on rail installation refer to the instructions included in the rail kit package.

Install rack-mount brackets

Four flat head screws must be used to secure each

rack-mount bracket to the unit.

Install rail cleats

Two pan head screws must be used to secure each rail cleat

to the unit.

suo0663a

Always place the UPS above the XLBP(s) in a stack

configuration.

Total stack configuration height is recommended NOT to exceed

18U. This is the equivalent of two XLBPs and one UPS.

Four screws must be used to secure each tie bracket to the units,

(see diagram).

For detailed instructions on installing batteries, the battery

doors, refer to the Rack-mount configuration section of this

manual.

Refer to the Rack-mount configuration section in this manual for

cable routing and bezel installation details.

Tie Brackets

(included with XLBP)

suo0664a

suo0665a

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 30 31

No comments

APC SURT15KRMXLI + Service Bundle 3 Specifications Page 8