APC AP9268 User Manual download pdf (Page 14)

Basic Installation

Attaching Multiple Switch Units

(Please note that cascading can only be done with AP9850, AP9851

or AP9853 cables)

1. Follow steps 1-8 of the Basic Install section for each cascaded unit.

2. Plug the 25-pin “D” connector of your input cable into any available channel

port on the rear of your base Switch unit.

3. Plug the 15-pin video connector on the other end of the cable into the

port labeled

on your ﬁ rst cascading Switch unit. Plug the PS/2 mouse

connector, designated by a yellow band or mouse icon, into the

port. Plug

the remaining 6-pin miniDIN keyboard connector into the

port.

4. Follow steps 9-11 for each attached computer.

2.2 Advanced Install

5. Repeat steps 2-3 for every cascaded Switch unit in your system.

6. Power-up your Switch unit(s) ﬁ rst, then all attached computers.

CASCADING

UNIT

BASE UNIT

PS/2 KEYBOARD CABLE

PS/2 MOUSE CABLE

VGA

MONITOR

CABLE

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 48 49

No comments

APC AP9268 User Manual Page 14