®
®®
®
USER’S GUIDE
masterswitch plus
52
Managing the Expansion Unit
Introduction
Overview
If you have purchased only the MasterSwitch Plus Expansion Unit (AP9225
EXP) and your configuration does not include an AP9225, you can
configure the Expansion Unit through MasterSwitch Plus internal menus.
Local access to the control console
You can use a local computer that connects to the MasterSwitch Plus
through the serial port on the front of the unit.
1. Select a serial port at the local computer, and disable any service
which uses that port.
2. Use the supplied serial cable (940-0024C) to connect the selected port
to the serial port on the front of the MasterSwitch Plus.
3. Run a terminal program (such as HyperTerminal) and configure the
selected port for 2400 bps, 8 data bits, no parity, 1 stop bit, and no flow
control. Save the changes.
4. Press
ENTER to access the internal menus.
When logging on, you will not need a user name.
Comments to this Manuals