APC MasterSwitch User's Guide download pdf (Page 62)

®®

USER’S GUIDE

masterswitch plus

Unit Properties Menu

Item Description

Name

Set the name of this MasterSwitch Plus unit. A maximum of 23 printable

ASCII characters is allowed.

Address

Specify the unit’s address (1– 4) in a cascading setup. Enter 1 for the

unit connected closest to the UPS, 2 for the unit adjacent to unit 1, and

so on for up to four units. See the Installation and Quick-Start manual

for instructions on setting up Expansion Unit addresses.

OTE: If the addresses for all units are not set up properly, the units will

not operate properly.

Manual

Button

Enable/disable the unit’s Manual button located on the front panel of

the unit.

Password

Set the unit’s password. The password is case-sensitive and can be up

to 9 printable characters.

Restore

Factory

Defaults

Resets the original settings for the MasterSwitch Plus unit. All unit and

outlet properties are set to their defaults.

View

Manufacturing

Data

Displays the following information: Model Number, Manufacture Date,

Hardware Rev, Firmware Rev, and Serial Number. These items cannot

be configured.

View Self-Test

Results

Allows you to display the results of the unit’s last power-on self-test.

The tests performed are:

Program Memory: Confirms that the EPROM chip is working properly.

Non-Volatile Memory: Confirms that the EEPROM chip is working

properly.

Menu Timeout

Period

Automatically logs you off after the specified period of inactivity.

Power On

Time Delay

The time that the MasterSwitch Plus will delay after AC power is

applied before starting the outlet’s power-on sequence.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 117 118

Comments to this Manuals

No comments

APC MasterSwitch User's Guide Page 62

Comments to this Manuals

Related products and manuals for Network switches APC MasterSwitch