APC AP9617 User Manual download pdf (Page 49)

USER’S GUIDE

network management card

From the DC System menu, type 2 to select OEM Parameters, which

displays the following calibration parameters, which are set at the factory

and cannot be changed:

8- Hardware

Temperature

Alarm

The alarm action to occur in response to any of the following

• No temperature probe cable is connected

• A faulty temperature probe cable is connected

• The temperature probe itself is faulty.

This alarm action occurs only if temperature compensation is

enabled. See Battery Thresholds.

Allowed values: any standard alarm selection.

9- Remote

Configurability

Disables remote write access to the DC Power Plant. You can re-

enable access only from the DC Power Plant’s front panel.

Accept Changes Use this option to save your changes.

Menu Item Description

Rectifier Offset Rectifier offset adjustment in volts.

Rectifier Gain Rectifier measurement gain adjustment.

Converter

Offset

Converter offset adjustment in volts.

Converter Gain Converter measurement gain adjustment.

Shunt Offset Battery shunt offset adjustment in amps.

Shunt Gain Battery shunt measurement gain adjustment.

Menu Item Description

Standard alarm selections

•Major activates the major relay.

•Minor activates the minor relay.

•Relay 1 through Relay 6 activates the relay specified.

•Ignore ignores the alarm.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

No comments

APC AP9617 User Manual Page 49