APC Network Management Card AP9619 User Manual download pdf (Page 13)

UPS Overview – Navigation

990-2819 Smart-UPS® VT ISX 20-30 kVA, 208/220/480V Operation 9

Frequencies.

Utility frequency, bypass frequency and output frequency in Hertz (Hz).

Load and batteries.

Load: Percentage of the load in relation to the total UPS capacity.

Bat Voltage: shows either the positive or negative half of the battery voltage (the lower value of the

two will appear).

Bat Cap: Percentage charge on the batteries in relation to the total battery capacity.

Runtime: The predicted runtime at the current load.

Batteries.

Bat AmpHr: Battery capacity, including both external and internal batteries.

UPS Temp: The highest external battery temperature.

Alarm thresholds.

Load: An alarm will be set when the load is above the threshold level.

Runtime: An alarm will be set when the runtime is below the threshold level.

Clock set-up

From the Setup screen on the Main Menu, you can change the date and the clock setting. From the

Settings screen, select Clock, and press ENTER. A date and a time line will appear.

Time.

The clock function is used to time-stamp events in the event log. To avoid inaccuracies, change the

clock-setting at e.g. daylight-saving time.

Date

• To change the date, press ENTER (the day field will become active). Press the UP/DOWN

arrow to select the desired date.

• To change the month and the year, follow the same procedures.

• Press ENTER to confirm the new settings, or ESC to cancel.

Control

Status

Setup

Logging

Display

Diags

Help

Main Menu

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

No comments

APC Network Management Card AP9619 User Manual Page 13