APC AR2901 Datasheet download pdf (Page 26)

NetShelter VL Enclosure—Unpacking, Installation, and Customization 22

Cable Management

The NetShelter VL enclosure has multiple cable access openings, including the roof, sides, and bottom.

Rear cable channels are available for purchase with this enclosure, and APC offers a variety of other

cable management accessories.

Rear cable channels (AR7501, not provided)

The rear cable channels attach to the enclosure anywhere along the side braces and provide toolless

mounting capabilities for APC Rack Power Distribution Units, APC cable containment brackets, and

tie-off locations for cables. The standard position for the rear cable channels are in the rear of the

enclosure, but they can be mounted anywhere along the side braces in a similar manner as the mounting

flanges.

Removing or relocating rear cable channels.

Rear cable channels can be relocated within the enclosure or removed completely.

1. Loosen the screws that attach the rear cable channel to the enclosure.

2. Move the rear cable channel to the desired location or lift it up and pull it toward the inside of the

enclosure.

3. Align the rear cable channel properly. The rear cable channels align in the same way as the

vertical mounting flanges. See “Adjusting the vertical mounting flanges on the side braces” on

page 18.

See the NetShelter VL Enclosure Rear Cable Channel (AR7501) Installation sheet

provided with the rear cable channel for installation and operation instructions.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

No comments

APC AR2901 Datasheet Page 26