APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 248)

SAS / SATA II NAS System

248

User’s Manual

Volume Status

Example 2:

Replication of one

logical volume is

initializing.

8. Go to Private Net node down to "Ethernet#1". Set the local and peer IP address,

check "Auto Enable on Starting Cluster" then save. Be sure not to select the

public IP (eth0 IP address) for both proNAS servers.

Private Net: Ethernet

Local/peer

Port Number

Specify an unused TCP port for each server to receive the

heartbeat sent from the peer server. The default value is

5000.

Local/peer IP

Address

Specify the IP Addresses of the network interface cards that

constitutes both ends of the private net. These IP

addresses must be on a separate subnet from the public

net.

Heartbeat

Interval

Specify the period of time between two consecutive

heartbeats.

Acceptable

Consecutive

Each server will keep counting and timing the heartbeats

received from the peer server. If the number of times a

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 248