APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 49)

SAS / SATA II NAS System

User’s Manual

5.2 RAID Set Functions

Use the Raid Set Function and Volume Set Function if you prefer to create customized

Raid Sets and Volume Sets. User can manually configure and take full control of the

Raid Set settings, but it will take a little longer to setup than the Quick Create

configuration. Select the Raid Set Function to manually configure the Raid Set for the

first time or to delete existing Raid Set and reconfigure a Raid Set.

5.2.1 Create RAID Set

To create a Raid Set, click on the Create RAID Set link. A “Select The Drives

For RAID Set” screen is displayed showing the disk drives in the system. Tick the

box of each disk drive that will be included in Raid Set to be created. Enter

the preferred Raid Set Name (1 to 16 alphanumeric characters) to define a unique

identifier for the Raid Set. The default Raid Set name will always appear as Raid Set

# xxx.

Tick on the Confirm The Operation option and click on the Submit button in the

screen.

NOTE: Maximum number of disk slots supported per RAID Set is 32.

For example, you have 16 disk drives in the NAS system, and you

connect a SAS JBOD expansion chassis also with 16 disk drives,

you can create a single RAID Set using all 32 disk drives.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 49