APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 31)

SAS / SATA II NAS System

User’s Manual

3.4 Connecting SAS JBOD Enclosures and/or RAID with SAS JBOD

1. To connect JBOD enclosure, use mini SAS cable. Insert one end to the SAS

Expansion Port of the NAS, and insert the other end to the SAS In port of the

JBOD enclosure (JBOD#1).

2. If there are other JBOD enclosures to be connected, connect the SAS cable from

the SAS Expansion Port of JBOD #1 to the SAS In Port of the next JBOD

enclosure (JBOD #2). Repeat the process until the last JBOD is connected in

daisy-chain.

3. If a RAID subsystem will be used, connect the SAS cable from the RAID

subsystem’s SAS Host Channel A (or Host Channel B, if needed) to the SAS HBA

Port of the NAS.

4. If a JBOD enclosure will be connected to the RAID subsystem in daisy-chain,

connect the RAID subsystem’s SAS expansion port to the JBOD enclosure’s SAS

In Port (JBOD#1). If there are other JBOD enclosures to be connected, connect

the SAS cable from the SAS Expansion Port of JBOD #1 to the SAS In Port of the

next JBOD enclosure (JBOD #2). Repeat the process until the last JBOD is

connected.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 31