APC RAID Subsystem SCSI-SATA II User Manual download pdf (Page 54)

SAS / SATA II NAS System

User’s Manual

5.2.4 Offline RAID Set

If it is needed to offline (and move) a Raid Set while the system is powered on, use the

Offline Raid Set function. After completing the function, the HDD state will change to

“Offlined” Mode and the HDD Status LEDs will be blinking RED.

To offline a Raid Set, click on the Offline RAID Set link. A “Select The RAID SET To

Offline” screen is displayed showing all existing Raid Sets in the subsystem. Select the

Raid Set which you want to offline in the Select column.

Tick on the Confirm The Operation, and then click on the Submit button to offline the

selected Raid Set.

IMPORTANT: If the Raid Set/Volume Set is already used by the

NAS system (joined to proNAS Volume Group), don’t use this

function.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 258 259

No comments

APC RAID Subsystem SCSI-SATA II User Manual Page 54