APC AP9268 User Manual download pdf (Page 21)

APC KVM Switch Installer/User Guide

APC KVM Switch

Configure Channel

Add Channel

ENTER-accept ESC-previous

Change ChannelAddress

Options For ID window

Dwell Time For ID window

Alpha Scan Dwell Time

Delete Channel

Change Channel Name

Once you have activated the main OSD Window, you can open the Command

Menu by pressing either of the Control keys twice.

The Command Menu options are selected in the same manner as channels

in the OSD Window. Scroll the Highlight Bar up and down and press Enter

when your selection is highlighted.

THE COMMAND MENU

If you are operating in non-secure mode or are the system administrator, you

will have several options that do not appear in the User level Command Menu:

Add Channel, Edit Channel, Delete Channel and Administrator Functions

are all covered in separate sections in this chapter. Scanning is covered

in Chapter 6.

If you experience a loss of mouse signal while using the APC KVM Switch,

select the ‘Reset PS/2 Standard Mse/Kbd’ option from this menu for a PC with

a standard mouse driver or ‘Reset PS/2 Wheel Mse/Kbd’ if you are using a PC

with a Microsoft IntelliMouse or other wheel mouse driver. This will reset and

in most cases restore your mouse signal. These commands are equivalent to the

<CM>MR<Enter> and <CM>MW<Enter> keyboard command listed in the

‘System Control & Maintenance’ section of this manual.

Choose the option ‘Version Information’ to display on your monitor the current

version level of your APC KVM Switch ﬁ rmware. Press the Esc key to clear

this information from your screen.

4.3 The Command Menu

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 48 49

No comments

APC AP9268 User Manual Page 21