APC KVM1116P User Manual download pdf (Page 79)

67KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual

Device Management

Device Information

The Device Management page opens with the top level (parent) KVM switch selected in the Sidebar and

Device Information selected on the menu bar.

General

The General section of the Device Information page displays the name of the selected device, its

firmware version, and information about its network configuration.

Note: The AP GUI version presents the same information as the Browser version. Scroll

through the list to see additional entries.

Environment

The lower panel displays the device's environment information.

Operating Mode

Use the Operating Mode page to set working parameters.

• Force all to grayscale: Enable to change the remote displays of all devices connected to the KVM

switch to grayscale. This can speed up I/O transfer in low bandwidth situations.

• Enable Device List: Enable for the switch to appear in the Server List of WinClient or Java Client

AP. See “Windows Client AP Login” on page 20, and “Java Client AP Login” on page 21. The

switch can still be connected, but its name will not appear in the Server List if the option is not

enabled.

Item Description

Power Supply

Detection

Power Supply 1 and Power Supply 2 icons display in gray when there is no power to the power

supply and in blue when power is present.

When enabled (there is a check in the checkbox), if there is only one source of power, a constant

warning beeps. A message displays asking for confirmation that having one power source is

intentional.

If one source of power is intended, to stop the beeping:

• Uncheck the checkbox to disable the function permanently.

• Confirm your intention in the dialog box to disable the warning temporarily. The warning

function will be back on after the next system reset.

The default for this function is enabled.

Fan Warning

Message

Place a check in the checkbox to enable a fan warning message. If enabled, when any fan stops

spinning the system records the event in the system log. If it is not enabled, the event will not be

recorded. The default for this function is enabled.

Note: The warning does not mean that the fan has failed, since the fans stop when the

temperature drops below the device's lower temperature setting.

Fan Speed Displays fan speeds. See “Fan Location and Speed Information” on page 109.

Temperature

Warning

Message

Place a check in the checkbox to enable a temperature warning message. If enabled, when the

device's temperature drops below the Low threshold setting, or exceeds the High threshold

setting, the system records the event in the system log. If it is not enabled, the event will not be

recorded. The default is enabled.

Temperature Displays temperature readings from the switch's built-in sensors in Celsius or Fahrenheit. See

“Temperature Sensor Location and Information” on page 109.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 133 134

Comments to this Manuals

No comments

APC KVM1116P User Manual Page 79

Comments to this Manuals

Related products and manuals for KVM switches APC KVM1116P