APC KVM1116P User Manual download pdf (Page 80)

KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 68

• Enable First Rider Transfer: Only the first user on a bus can switch ports when enabled. Other

users on the bus cannot switch ports unless another bus is already connected to the port they

would like to access, or there is a free bus available. See “Users and Buses” on page 89 for more

information.

• Keyboard/Mouse Broadcast: Choose the setting from the drop down list.

– Keyboard Broadcast: Keystrokes will be duplicated on all attached servers currently listed in

the Sidebar when enabled.

– Mouse Broadcast: Mouse movements and clicks will be duplicated on all attached servers

currently listed in the Sidebar when enabled.

Note: 1. On a child KVM switch tiered from the parent or top level KVM switch,

only one port can perform a Keyboard/Mouse broadcast at a time.

2. For Mouse Broadcast, you and all the servers must be running the same OS, the

monitors must have the same resolution, and screens must have an identical layout.

• Console Keyboard Language: Specify which keyboard mapping is being used by the Local

Console keyboard from the drop down list.

Network

IP Installer. The IP Installer is an external Windows-based utility for assigning IP addresses to the KVM

switch. Click one of the radio buttons to select Enable, View Only, or Disable for the IP Installer utility.

See “IP Installer” on page 105 for details.

Note: If you select View Only, you can see the KVM switch in the IP Installer’s Device List,

but you cannot change the IP address. For security, it is recommended to set this to View

Only or Disable after each use.

Service Ports. As a security measure, if a firewall is being used, the Administrator can specify the port

numbers that the firewall will allow. If a port other than the default is used, users must specify the port

number as part of the IP address when they log in. If an invalid port number (or no port number) is

specified, the KVM switch will not be found.

Note: 1. Valid entries for all Service Ports are from 1-65535.

2. Service ports cannot have the same value. Set a different value for each port.

3. If there is no firewall (on an Intranet, for example), these numbers will have no effect.

Field Explanation

Program This is the port number for connecting with the WinClient ActiveX Viewer, WinClient AP, Java

Applet Viewer, Java Client AP, or via Virtual Media. The default is 9000.

HTTP The port number for a browser login. The default is 80.

HTTPS The port number for a secure browser login. The default is 443.

SSH The port for SSH access. The default is 22.

Telnet The port for Telnet access. The default is 23.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 133 134

No comments

APC KVM1116P User Manual Page 80