APC Automatic Disconnect Switch Specifications download pdf (Page 26)

Overview: ATS Component Details

16 Automatic Transfer Switch with Power Distribution

Automatic operation control panel

For a discussion of Automatic Operation of the InfraStruXure Power Generation System, see

“Automatic Operation” on page 19.

User connection plate

For a description and the location of the user connection plate, see number 2 on page 11. For clarity,

the user connection plate in the illustration below is turned upside-down from its factory-installed

position.



The Not in Automatic Operation

LED is lit when the ATS is NOT

in automatic operation, typically

when the automatic operation

switch is in the Disable position.

However, in rare instances, the

Not in Automatic Operation

LED can be lit when the automatic

operation switch is in the enable

position. See page 21 for more

information.



Select whether the generator will automatically turn on after a loss of power using the

Automatic Operation switch.



Connect the ATS to the network or the

InfraStruXure Manager through the

surge-protected ethernet port. This

port protects your network connection

from power surges.



The user connection plate has four input

contact connections for monitoring

Normally Open (NO) or Normally

Closed (NC) dry contacts. See page 46

and page 61 for more information.



The user connection plate has four relay

output connections for connection of

NO or NC dry contacts. See page 46 and

page 61 for more information.



Connect an Emergency Power-Off switch at one of three choices of EPO Connections

(24VDC, 24VAC, or contact closure). See page 63 for more information.









1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 101 102

Comments to this Manuals

No comments

APC Automatic Disconnect Switch Specifications Page 26

Comments to this Manuals

Related products and manuals for Network switches APC Automatic Disconnect Switch