APC AP9617 User Manual download pdf (Page 34)

USER’S GUIDE

network management card

FTP Server, and Telnet & Web options

Each of these options has a setting which enables (by default) or disables

Access, and a Port setting that identifies the TCP/IP port used for

communications with the Management Card. The default Port settings are 21

(FTP), 23 (Telnet), and 80 (Web interface).

To enhance the protection provided by User Name and Password settings,

change the Port setting to a unique port number from 5000 to 65535. After

this change, when you log on, you must add a colon (:) and the non-default

Port number to the IP address used. The following examples show the FTP,

Telnet, and Web interface commands needed when the Port numbers have

been changed to 5000 for FTP, 59401 for Telnet, and 65002 for HTTP at a

management card with a System IP address of 159.215.12.114:

ftp 159.215.12.114:5000

telnet 159.215.12.114:59401

http://159.215.12.114:65002

The Telnet and Web options are combined in the Web

interface but separate in the control console.

See also

To use FTP to download configuration files, see the Management

Card Addendum (.\doc\en\addendum.pdf) on the APC Network

Management Card utility CD.

To use FTP to access a text version of the Management Card’s Event

Log or Data Log, see How to use FTP to retrieve log files.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 103 104

No comments

APC AP9617 User Manual Page 34