APC AP9617 User Manual download pdf (Page 56)

USER’S GUIDE

network management card

8- Current Limit

Alarm

The alarm action that occurs if one or more converters have

been forced into the “current limited” mode.

Allowed values: any standard alarm selection

or n of N

9- Standby Alarm The alarm action that occurs if one or more of the converters are

in standby mode.

Allowed values: any standard alarm selection

or n of N

10- Fan Failure

Alarm

The alarm action that occurs if the fan fails in one or more

converters.

Allowed values: any standard alarm selection

or n of N

11- Failure Alarm The alarm action that occurs if the output of one or more

converters fails.

12- Hardware

Voltage Alarm:

The alarm action that occurs if converter voltage is outside

reasonable limits or if a voltage measurement failure occurs.

Note: There is a single converter voltage for all converters.

Allowed values: any standard alarm selection

13- Accept Changes Use this option to save your changes.

Converter Alarms Description

Standard alarm selections:

Major activates the major relay.

Minor activates the minor relay.

Relay 1 through Relay 6 activates the relay specified.

Ignore ignores the alarm.

n of N activates the alarm setting for menu item 4 (1 of N) if one converter fails, or

activates the alarm setting for menu item 5 (2 of N) if two or more converters fail.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

No comments

APC AP9617 User Manual Page 56