APC Network Management Card AP9619 User Manual download pdf (Page 19)

UPS Overview – Operation Modes

990-2819 Smart-UPS® VT ISX 20-30 kVA, 208/220/480V Operation 15

Turn into mechanical bypass using the Mechanical Bypass Lever



From the Main Menu, select Control and press ENTER.



Use UP/DOWN key to navigate to UPS into Bypass and press ENTER.



Use UP/DOWN key to navigate to YES, confirm UPS into bypass, and press ENTER.



Remove UPS Front Panel.



Turn the Mechanical Bypass Lever upwards to activate the internal mechanical bypass switch.

The load will now be supported directly by utility power.

Caution

The load is not protected by the UPS when the internal mechanical bypass system is

active, and, the power is not conditioned.

Note

If the UPS is running and controllable through the display, carry out steps 1 through 6.

If not, go directly to step 4.

Control

Status

Setup

Logging

Display

Diags

Help

Main Menu

10/100Base-T

Probe

AP9619 Network Management Card EM

Reset

Output

Pwr

Zone

10/100



1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

No comments

APC Network Management Card AP9619 User Manual Page 19